Features：
1.Main material with top quality aluminum oxide
2.Best quality fiber glass with better safety
3.Excellent cutting performance higher efficiency
4.Suitable for ordinary steel stainless steel cutting
5.Over 30% Longer life

THE INSTALLALAN OF THE PRODUCT AND USE IT：

1.Grinding wheelin the visualinspection prior to use,are not allowed to be used if there is any breaKage.
2.Grinding wheel on the grinding machine,instalation requirements of contact with the grinding wheelfange disk and clean leveloff,caughtin the wheel fange on both sides ofthe shape,size,must be the same.Moderate elastic fasteningemerywheel,requirements,is too loose,too tight or grinding wheel and the fangeinterfaceis an important factor which causes damage of grinding wheel.And only allow the use of specialspannerreinforced by hand. It is orohibited to use complementary fxture(such as thelengtheningwrench) and tap wrench,in order to prevent man-made damage of grinding tool.
3.Grinder spindle should comply with the technical requlrements,the diameter of axleis too small,the grinding wheel to install different heart,caused by grinding wheel to beat even when using blasting.
4.When using the grinding wheel,want to add wheel cover,to ensure the salely of use.
5.Grinding wheelusing speed shouldnot exceed the trademark rules work.When using pneumatic tools,grinding,especially when more machine using the same source,to controlthe air pressure,prevent alrpressureistoolarge.leadto more than the highest speed,so that thegrinding wheel broken cuts.
6.When using the grinding wheel to slowly feed,too hard and prone to the phenomenon ofstalling stuck and bump broken grinding wheel.lf a wheel stuckto immediately lift the grinding wheel.lest produce grinding burn out or broken.
7.Cutting the work piece,don't more than stacked up cutting,becausemany overlapping Buka tight,grinding wheel work easy to card is broken,cause serious accidents.
8.Should not be used for cutting the end face of grinding wheel grinding work.
9.Wear protective equipment operation when used according to stipulations.

PRODUCTS SAFEKEEPING:

1.After customers buy wheel must check whether marked according toregulations,factorystandard,regulations,codes ofabrasive,grain size.hardness,maximumspeed,manufacturing time.
2.Grinding wheel deposit should prevent be affected with damp be affected withdamp and variant,notdirectly on the ground,should the paperback stacked inthe wooden plate or the gallows.it isadvisable to fold the height is less than one meter.Wafer grinding wheel cannot be put inclined orvertical position.
3.Room temperature is not lower than 5 C Grinding wheel storage time morethan a year,should be torotaryinspection,confirmed qualifed after use.